Vosper Perkasa P150 1/32 Scale - Radio Control (R/C) Model (Build Log - Part 19)
This is the nineteenth entry in the build log and relates to Step 19: Painting and Marking Guide. In this step, I describe which parts are painted in which colours.
The 400ML (Satin Finish) Aerosols I used are listed below:
The 10ML (Matt Finish) Humbrol tinlets I used are listed below:
Click images for a larger view.
The above picture is a library image of a Perkasa class vessel being fitted out (probably in 1967), as can be seen by the ‘KD’ on the upper part of the life ring.
Click images for a larger view.
The above image is the model boat at the same angle for comparison. I am very pleased with the result.
Click images for a larger view.
I used premixed cellulose aerosols for the bulk of the work, these cans are available from Morelli’s in the UK and similar car body repair paint suppliers. Although you could use acrylic, I prefer the spray modulation that these cellulose aerosols always provide, as they come with very precise nozzles with adjustable fans.
Click images for a larger view.
In addition, cellulose has a very rapid flash off to touch dry, (which is essential when you have to spray outside and hope nothing lands on your work). They do retail at about £8 each, but are very much worth it.
Click images for a larger view.
